TUNING AND TOOLS

Holmenkol 5mm Plexi Wax Scraper is a beefier version of the 3mm scraper and suitable for more robust workshop and race use. It’s a simple and easy to use plastic scraper suitable for removing excessive wax when hot waxing skis or snowboards. It also has a notched corner for removing wax from the metal edge and one square and one round corner for removing wax from skis with groves in the base.

Features and Specs.

Plastic construction

5mm thick

Size: 130 m x 60mm x 5mm

Art.-Nr. 20523

Extra-sharp, durable Nirosta blade

11.5 x 6 x 0.01 cm

Optimally suitable for edge tuning and working surfaces

A diamond file gives World Cup quality results, polishing blemishes in edges from your tuning file for as smooth, strong and sharp a tune as possible. 

These files are also fantastic for removing the dreaded "hanging burr" to prolong ski and snowboard edge life.

Although Holmenkol say to use this with an edge file guide, we would recommend caution, and for us, we use the file by hand as we are looking to polish, not reset the edge! Also, always use a little water (or snow) when using the file for a better and quicker polish.

For best results, buy all the options and work your way from coarse to fine for a race quality finish.

Make sure to carry your file with you on the mountain too, for quick touch ups that you will especially appreciate in icy conditions.

Holmenkol Oxyd Mini Oxide Stone is handy item to have around for removing those hardened ski or snowboard edge burrs that are too tough for a standard steel file to handle.

It can be used on its’ own or in a file holding tool.

Supplied with a plastic storage sleeve for protection, a must-have item for professional or amateur ski technicians.

Features and Specs:

• Aluminium oxide construction
• Supplied with plastic storage sleeve
• Deburring ski and snowboard edges
• Size: 100 x 25 x 5mm

Product Code 20561

This version of the brush is the World Cup standard model with a large ovalised block wood base and double riveted handle for secure grip and more even pressure.

This model also has 33% longer hairs than the compact model at 12mm, to extend brush life and give a deeper polish for waxes and race dressings. This hair length matches the horsehair brush version too for a perfect partnership!

The hairs used by Holmenkol have a perfect balance between longevity and performance, compared to cheaper alternatives, with the outer hairs slightly more durable to reduce brush 'flare' compression over time.

Pair this Holmenkol Oval Brush Nylon Base Structure Brush with a brush such as the Holmenkol Horsehair Base Brush or a brass based brush, and you can add multiple profiles of structures to your base wax, to improve glide performance by further reducing stiction.

Features and Specs:

• Dimensions: 210mmx100mmx32mm
• Hair depth: 12mm
• Weight: 300g
• Wood body/nylon construction
• For preparing and finishing ski and snowboard bases
• Product Code 24530

Block of high quality wax in the 150g option, supplied in a storage case with lid to keep the wax clean when not in use.

BETAMIX RED

• smooth application and glide performance
• works well in anything but Spring or extreme cold conditions
• ideal as a base preparation layer for new skis or a complete ski or snowboard surface. 
• Beta Mix also makes a great transport wax thanks to its resistance to abrasion.
• Recommended iron temperature: 125-130°C
• Snow temperature range: -4 to -14°C
• Snow types: all snow types
• Contents: 150g wax block
• Colour: Red

Ultra Mix Blue by Holmenkol is a high quality coldest conditions ski and snowboard wax for when the temperature really drops on the mountain.

When the snow temperature tumbles below -8°C and towards -20°C this wax will perform. 

Recommended iron temperature: 135-145°C

Snow temperature range: -8 to -20°C

Snow types: all snow types - especially effective on cold corn snow and old coarse snow

A much harder wax compound, it resists coarse snow crystals and hard abrasive snow that colder conditions bring, and retains its structure for longer as a result.

For best results use a brass/bronze brush alongside a nylon wax brush to really open the structure up and help improve glide performance.

With this wax set your iron to 140°C and ONLY use a ski waxing iron at this temperature as this is right on the limit of the maximum temperature you can use on bases without risk of delamination.

Digital waxing iron.

Electronic temperature control from 0 ° C to 200 ° C

VOLA Digital wax iron with precise consistent temperature control(super heavy weigh soleplate)

Non-stick base plate with chamfered edges easily glides along base when melting wax.

230V/1000 Watts of power and a thick plate ensure quick and constant heat.

Highly accurate thermostat provide exact temperature control. 2.0 meter power cord,

Soleplate dimensions:16 x 9.5 x 3.5 cm

With a iron pad.

Heats up quickly to deliver a working temperature range of 80 Degrees to 200 Degrees C.

It also features a digital readout to continually display its current operating temperature.

Vola Waxing Iron

 Precise, consistent temperature control.Thick base plate holds heat well and is accurately adjustable to melt all temperature ranges of wax.adjustment temperature working range from 100 - 160 degress C for different types of waxes (eg:cold,warm, universal etc) melt at different temperature required. 

The vola ski wax iron Adjustable heat with a thick, 6.2 x 3.74 x 0.59 In heat plate(160*95*15mm).Dimpled base allows the iron to move easily over your base (think golf ball). Thick cast aluminum base retainsheat,minimizing temperature fluctuation.

The Waxing Iron with Textured Dimpled base plate.This base plate design breaks up the suction of melting wax that occurs with flatter wax iron bases. Dimpled base plate reduces suction for even application. 

Strong and durable agronomical body feels great with 78.74inch(2 Meter) Power Cord

CE Certification,and instructions to make wax work safer and more easily.

Ski Wax Iron by VOLA is a practical, affordable iron that competes with many which are far more expensive.