DEUTER

On your back, ready, go. The new Guide is not only lighter than its predecessor, but also cleverly thought out. With the frontal access, you can get to your equipment quickly and don't lose any time on your tour. If you want to save additional weight, simply remove the hip fins, the helmet bracket or the frame. Thanks to the Alpine Back System, the rucksack sits tight and close to your body: you are safe on the mountain. 

FEATURES

VariFlex System

Load transfer to the hip fins thanks to the flexible V-frame

Height adjustable lid

Load adjustment straps

Adjustable sternum belt

Ice Axe Attachment

Walking pole holder

Removable hip belt

SOS label

Ski carry system

Compression straps

Helmet Mount

Goggle holder on shoulder strap

Compatible with 3.0 liter drinking system/bag

Accès latéral zippé au compartiment principal

Separate bottom compartment with zip-on base

Alpine System

PFC free

MATERIAL

330D PA 6.6 Ripstop

Deuter Microrip is a 330 denier polyamide blended fabric offering fantastic tear resistance. The use of Nylon 6.6 makes the material very durable and robust. Thanks to the PU coating, it is also waterproof (WC 2.000 mm) and is, therefore, the perfect material for big packs.

330D PA 6.6 Ripstop

630D PA

* D stands for denier. This describes the yarn weight. 600D corresponds to 600 grams per 9000 meters.

* PES stands for polyester. PES fibres are very tear and abrasion resistant and hardly absorb moisture.

* PA stands for polyamide. PA fibres are extremely durable and abrasion-resistant. They are also characterized by high elasticity and low weight.

Keep items clean and dry with theses light roll top dry packs.

Also great for separating items.

• fits in backpack lid compartment
• loop on base to hang it up
• D-ring for attachment
• roll-top closure: to be rolled down at least 3 times before securing with buckle
• welded seams
• Caution: not suited to activities where the Drypack might become submerged in water
• fabric’s >10,000 mm hydrostatic head keeps out dust and heavy precipitation
• efficient packing thanks to rectangular bottom shape

Volume: 3 litres

Size: 21 cm high x 22 cm diameter

Weight: 35g

Material: 70D PA Carbonite Ripstop

Colour: Magenta

• Flap on the bottom for hanging up
• Roll closure: Before closing the buckle: roll up at least three times to keep the contents dry 
• Caution: not suitable for situations where the Drypack is submerged under water.
• Material with 10,000 mm water column protects against dust or heavy rain 
• D-ring for fastening
• sealed seams
• efficient packing thanks to rectangular base shape 
• Material: 40D PA RIPSTOP

Lightweight

PFC free

MATERIAL

40D PA Ripstop

Material with 10,000 mm water column protects against dust or heavy rain 

40D PA Ripstop

* D stands for denier. This describes the yarn weight. 600D corresponds to 600 grams per 9000 meters.

* PES stands for polyester. PES fibres are very tear and abrasion resistant and hardly absorb moisture.

* PA stands for polyamide. PA fibres are extremely durable and abrasion-resistant. They are also characterized by high elasticity and low weight.

• 20-litre version fits in backpack bottom compartment (backpacks >35 litres)
• loop on base to hang it up
• D-ring for attachment
• roll-top closure: to be rolled down at least 3 times before securing with buckle
• welded seams
• Caution: not suited to activities where the Drypack might become submerged in water
• fabric’s >10,000 mm hydrostatic head keeps out dust and heavy precipitation
• efficient packing thanks to rectangular bottom shape

Lightweight

PFC free

Material 

Material with 10,000 mm water column protects against dust or heavy rain 

40D PA Ripstop

* D stands for denier. This describes the yarn weight. 600D corresponds to 600 grams per 9000 meters.

* PES stands for polyester. PES fibres are very tear and abrasion resistant and hardly absorb moisture.

* PA stands for polyamide. PA fibres are extremely durable and abrasion-resistant. They are also characterized by high elasticity and low weight.

Weight

70 g

Volume

20 Liter

Dimensions

33 / 35 / 18 (H / W / D)

• loop on base to hang it up
• D-ring for attachment
• roll-top closure: to be rolled down at least 3 times before securing with buckle
• welded seams
• Caution: not suited to activities where the Drypack might become submerged in water
• fabric’s >10,000 mm hydrostatic head keeps out dust and heavy precipitation
• efficient packing thanks to rectangular bottom shape

Lightweight

PFC free

MATERIAL

Material with 10,000 mm water column protects against dust or heavy rain 

40D PA Ripstop

* D stands for denier. This describes the yarn weight. 600D corresponds to 600 grams per 9000 meters.

* PES stands for polyester. PES fibres are very tear and abrasion resistant and hardly absorb moisture.

* PA stands for polyamide. PA fibres are extremely durable and abrasion-resistant. They are also characterized by high elasticity and low weight.

Weight

80 g

Volume

30 Liter

Dimensions

45 / 31 / 21 (H / W / D)

The Freerider pack has clever winter-specific details like access to the main compartment via a fully opening back panel. This gives you good oversight of the contents and it also means the carry system stays dry. But even if a little snow does get onto the carry system, our new hard-wearing, breathable, snow-resistant fabric will keep your back dry. And when it comes to safety, the Freerider has it all worked out. It features a separate, easy-to-access compartment for your probe and shovel so that your avalanche equipment is quick to access in an emergency. We’ve also equipped it with our new modular attachment set-up. Two dedicated straps that attach to the gear loops on the pack allow you to affix skis, a snowboard or snowshoes to the pack in no time at all – skis diagonally across the back or in an A-frame, a snowboard or snowshoes in an upright position. These versatile gear straps can also be used as compression straps.

FEATURES

Alpine System

Delrin® U-frames

Hip fin with loops

Adjustable sternum belt

Load adjustment straps

Goggle holder on shoulder strap

Reinforced safety compartment for shovel blade and handle

Ice Axe Attachment

A- Frame Ski Fixation

Zipped access at the back

Attachment loops for the helmet holder

SOS label

Compatible with 3.0 litre drinking system/bag

Special compartment in the inside of the backpack to keep your valuables safe

Elasticated inner compartment for storing wet/sweaty clothing, water reservoir, etc.

PFC free

ALPINE

MATERIAL

330D PA 6.6 Ripstop

The tightly woven 210 and 330 denier polyamide fabric is the ideal combination of high strength and low weight. The technical shiny surface with robust Ripstop threads lends the fabric its striking appearance. The extremely light and yet highly stable fabric is perfect for robust lightweight constructions. High-quality PU coating.

210D PA Ripstop

A 210 denier polyamide fabric with stronger RipStop threads and PU coating. This very fine and light, yet extremely robust fabric is ideal for the construction of lightweight backpacks.

* D stands for denier. This describes the yarn weight. 600D corresponds to 600 grams per 9000 meters.

* PES stands for polyester. PES fibres are very tear and abrasion resistant and hardly absorb moisture.

* PA stands for polyamide. PA fibres are extremely durable and abrasion-resistant. They are also characterized by high elasticity and low weight.

YOUR OPTIMAL COMPANION FOR

Ski tour (5 of 5)

Freeriding (5 of 5)

Skiing (5 of 5)

Snowboarding (5 of 5)

The Freerider pack has clever winter-specific details like access to the main compartment via a fully opening back panel. This gives you good oversight of the contents and it also means the carry system stays dry. But even if a little snow does get onto the carry system, our new hard-wearing, breathable, snow-resistant fabric will keep your back dry. And when it comes to safety, the Freerider has it all worked out. It features a separate, easy-to-access compartment for your probe and shovel so that your avalanche equipment is quick to access in an emergency. We’ve also equipped it with our new modular attachment set-up. Two dedicated straps that attach to the gear loops on the pack allow you to affix skis, a snowboard or snowshoes to the pack in no time at all – skis diagonally across the back or in an A-frame, a snowboard or snowshoes in an upright position. These versatile gear straps can also be used as compression straps.

FEATURES

Alpine System

Delrin® U-frames

Hip fin with loops

Adjustable sternum belt

Load adjustment straps

Goggle holder on shoulder strap

Reinforced safety compartment for shovel blade and handle

Ice Axe Attachment

A- Frame Ski Fixation

Zipped access at the back

Attachment loops for the helmet holder

SOS label

Compatible with 3.0 litre drinking system/bag

Special compartment in the inside of the backpack to keep your valuables safe

Elasticated inner compartment for storing wet/sweaty clothing, water reservoir, etc.

PFC free

ALPINE

MATERIAL

330D PA 6.6 Ripstop

The tightly woven 210 and 330 denier polyamide fabric is the ideal combination of high strength and low weight. The technical shiny surface with robust Ripstop threads lends the fabric its striking appearance. The extremely light and yet highly stable fabric is perfect for robust lightweight constructions. High-quality PU coating.

210D PA Ripstop

A 210 denier polyamide fabric with stronger RipStop threads and PU coating. This very fine and light, yet extremely robust fabric is ideal for the construction of lightweight backpacks.

* D stands for denier. This describes the yarn weight. 600D corresponds to 600 grams per 9000 meters.

* PES stands for polyester. PES fibres are very tear and abrasion resistant and hardly absorb moisture.

* PA stands for polyamide. PA fibres are extremely durable and abrasion-resistant. They are also characterized by high elasticity and low weight.

YOUR OPTIMAL COMPANION FOR

Ski tour (5 of 5)

Freeriding (5 of 5)

Snowboarding (5 of 5)

Skiing (5 of 5)